Garage Door. Saturday , December 09th , 2017 - 05:55:02 AM
Some manufacturers tout the insulation value of garage doors. Most people question this concern, since the garage in most homes is neither heated nor cooled. If insulation is a concern to you, lightweight polystyrene foam insulation can be added to most doors. Insulated doors will help to reduce the amount of outside temperatures that enters your garage, thus keeping it more comfortable for you. An insulated door is generally quieter and has a more attractive interior than an uninsulated door.
Several garage door manufactures have specialized in creating the look of carriage doors using the standard garage door format. Some manufactures use standard rolling panel construction that has a carriage door pattern designed into the garage door. Using modern materials especially steel will make this type of garage door both secure and very durable. The use of solid one piece overhead garage door construction gives the carriage garage doors an authentic look. This older style cantilever door opens outward at the bottom and rotates upward as on solid door. This method of construction works well when using an all wood door construction.
In response to the inherently dangerous old style garage spring issues as above, a newer and safer system for opening the overhead garage door was created. The idea was to transfer the load or weight of the door via a cable and pulley system to a vertical rod now equipped with a torsion (twisted) spring. This type of spring is installed with specialty hardware and bolts to a fixed plate at one end, while the entire spring is installed around a horizontal pipe. This load balancing device is normally installed directly over the header of the garage opening. Using appropriate cables, connectors and pulleys, the weight of the garage door is transferred into the torsion spring system. The difference between the old style stretched spring and the newer torsion spring is the way that the spring energy is stored. With the old style stretched spring, the energy is stored and released by pulling on the spring or returning the spring to its un-stretched condition. With a torsion type of spring, the energy is imparted or removed by rotating the spring clockwise or counter clockwise depending upon the direction of usage. With professional installation, the complete loading of the torsion spring is controlled by the garage installer, and is determined by the weight and size of the garage door that it is operating. When this type of torsion spring fails, it remains attached and intact to the location on the horizontal control rod where it was mounted. I have not heard of or seen any torsion spring fly across a garage, creating injury from failed components as with the stretched older style garage door springs. This is not to say that injuries have not occurred with the torsion style spring. The installation of this type of spring is generally safe when left to a trained garage door installation professional. Severe and serious injuries have occurred when untrained, unqualified individuals have attempted to install or service this type of spring. In most installations, a warning tag is left attached adjacent to the torsion spring when the garage door is installed. This tag warns of the danger associated with the stored energy of this spring, and alerts untrained individuals to not attempt any repair, adjustment or to even touch the spring and associated hardware. When the label that should be attached to this spring becomes damaged, is removed or tampered with, it is important that a new warning label be reattached immediately to show the dangers of this spring tension
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does hayslas.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.